EFTA01976591

To: Jeffrey [email protected]] From: Richard Kahn Sent: Wed 5/15/2013 2:48:41 PM Subject: Fwd: Scaffolding attached arc Ion thoughts on building scaffolding my cost estimate is as follows: michael 5400 per day (vs 300) ion S300 per day 3.5 days for install and take apart = 3.5 x 700 = 2,450 estimated material cost with delivery = 1,050 total cost 3,500 please advise if ok to proceed Richard Kahn HBRK Associates Inc. New York. New York 10022 tel fa cell Begin forwarded message: From: ion nicola Date: May 14, 2013 9:00:52 PM EDT To: Richard Kahn Subject: RE: ScaffolPltng hi rich, i drew a sketch of a scaffolding (platform) can be built with wood as i told you, see attachment. i didnt draw all the verticals we need. in the between two verticals should be another one in the middle, so the total no of verticals (2by4) is 35. for horizontal we need like 23 pieces of 2by4. X we need 26 pieces of 2by4 so total of 2by4 would be around 90 pieces. these 2by4 comes 8, 10, or 12 feet long, and one piece is around $3, so the total would be like $300. then for the platform we need 12 pieces plywood 8x4ft, 2/3 inch thick, plus two more pieces of plywood to cut squares of plywood lx1 ft to put under the legs to protect the rug in the room. and one piece of plywood should be around $25. EFTA_R1_00462806 EFTA01976591 so total plywood would cost around $400 so probably all the materials would be around $800, and everything can be reused. the platform would be 16ftX24ft. the entire dinning room is 21ft X27ft but i dont need close to the wall because the crown molding is one and a half foot wide.. i told you about michael, to do that because he is engineer and he've done it before, ..and said i can help him because i am engineer too, i studied poli technique 4 years before fine arts.. so there would be two engineers... :-) but any construction company could built this platform too, probably faster because they can bring more people.., but they should be very carefully with the walls.. if the ceiling would be low probably you can use just a moving scaffolding to do the painting on the ceiling or even a ladder, but this ceiling is too high.. and for any move you have to get off 9 or 10 feet high.. sorry its kind of complicate to do a painting on a that high ceiling.. From Subject: Scaffolding Date: Tue, 14 May 2013 16:47:48 -0400 To: Rich B had previously purchased scaffolding (see attached) Please let me know if this work or if you need something more expansive Thank you Richard Kahn N 10022 tel fa cell Begin forwarded message: From Date: May 14, 2013 4:07:23 PM EDT To: Subject: Messa e from KMBT C253 Reply-To EFTA_R1_00462807 EFTA01976592