From: Leighton Allenby <I

From: Leighton Allenby <I To: Ann Rodriquez Cc: Leighton Allenby <I LSJ - Danny Vicars <1 Bcc: [email protected] Subject: Re: Ice maker installed Date: Mon, 10 Aug 2015 01:08:49 +0000 Attachments: IMG 1656.jpg; IMG 1657.jpg; IMG 1658.jpg; IMG 1659.jpg Hello Anna and Danny, I returned today to LSJ and inspected the ice maker. A few suggestions to complete the install: I. can ice maker go back an inch or so to hide left side of ice make hinge? - it doesn't look appealing to the eye! 2. install a piece of white trim on the top to fill void 3. remove white trim that only goes half way up right side - not sure why this wasn't done during install 1. replace with full white trim board flush to cabinet to match left side 4. touch up damaged base with high gloss white lacquer paint to match cabinets/trim paint should match cabinet/trim paint 5. see attached pictures 6. Other Cabinets & bases: I. touch up all knicks - I can show and mark with blue painters tape 2. adjust cabinets that rub - I can show and mark with blue painters tape 3. cabinets to left and right of stove hood are damaged from hitting vent - solution is to install a small clear cabinet stop on both sides of vent. I can show Danny size to purchase. They attach by a sticky back like the ones inside of the cabinet, 7. Large picture needs to be straightened. see attached picture. 8. All light switch and electrical plate screws need to be verticle and centered 9. Perhaps one of the carpenters can do this on Tuesday? I would also like to meet with Supervisors tomorrow morning for updates on projects, including Carlos - what time works for everyone? 8AM at Tiki Hut? Best, Leighton Leighton Allenby Director of Pro erties 2015-08-06 13:09 GMT-04:00 Ann Rodriquez >: EFTA00635851 Ann R. EFTA00635852