From: Kyle reavis

From: Kyle reavis To: "jeffrey E." <[email protected]> Cc: Richard Kahn , Subject: Ken update Date: Fri, 21 Dec 2018 19:54:33 +0000 Attachments: 8C9C540E-31EF-4449-9804-01B89CA I 2EAAjpeg; 2D34A244-077A-4622-BFAC- 615DD9CFF8F3jpeg; 6E171E8C-52711-4481-9335-Et465AAD3EA44jpeg; EECB1159- AB93-40FC-B5C7-ECFBF5AF9D6Cjpeg; 83423146-1484-485D-832C- 16E5DFOE0364.jpeg; 349281107-2EBA-422F-A26E-B77D3B2A841Ajpeg; 2D9CA52B- CAAA-4269-AC03-58AA3D559DBEjpeg Good Afternoon, I just went by kens shop he was not in. I spoke to two of his workers and they said they are planning to come out at some point tomorrow. They were just starting to epoxy laminate the edges on. They still have to cut the edges and to do so the epoxy must be cured. I do not see how they will manage to finish this work before tomorrow along with the issues of chipping from their saw. That being said if they come out and install without us viewing the tops before arrival they will most likely try to make us accept them as is. Please let me know your thoughts on this, at this point I would recommend moving forward with the other vendor and cutting ties with ken and moving to get a credit back from EB. Kyle EFTA01010813