From: Richard Kahn

From: Richard Kahn To: "Jeffrey E." <[email protected]> Subject: Dock Fenders Date: Tue, 23 Jun 2015 19:44:00 +0000 Attachments: SHBRK_Scann15062315370.pdf Layout Attached are 5 layout options for dock fenders in addition to our current layout Options 1-3 are three rows of 6' fenders Carlos measured to cover entire dock we would need 693 feet which comes to 116 (6' pieces) Options 4 & 5 are two rows of 6' fenders Carlos measured to cover entire dock we would need 462 feet which comes to 77 (6' pieces) Note 500 feet is minimum order therefore we will need to order 84 pieces Carlos has sample on LSJ in dark grey color which you said was correct color If you are not satisfied with any of the above layouts please advise on alternate configuration Fender Holes Regarding Holes in Fenders i also outlined two options Option A - Screws will be 1.5 feet apart Option B - Screws will be 1 foot apart The Back Hole would be 1/2" and Front Hole will be 1.5" Timing Production will take 3 weeks and then another 1 week for shipping Projected arrival on STT is July 20 Installation Carlos said that with Ramon and Hernando installation will take approximately 1 week Projected Costs Options 1-3 (three rows of fenders) Color - Dark Grey # 11181 13.44 x 693 feet = 9,314.92 Vendor Hole Drilling (1 drilling cost per hole x 116 pieces x 3 holes) 348.00 Stainless Steel Threaded Rods & Bolts (estimated 116 pieces x 3 screws per piece x 12.00) 4,176.00 EFTA00853629 Tropical Shipping Miscellaneous Tools (drill bits, etc) Total Cost with three rows of fenders 1,500.00 661.08 16,000.00 Options 4 & 5 (two rows of fenders) Color - Dark Grey # 11181 13.44 x 500 feet = 6,720.00 Vendor Hole Drilling (1 drilling cost per hole x 84 pieces x 3 holes) 252.00 Stainless Steel Threaded Rods & Bolts (estimated 84 pieces x 3 screws per piece x 12.00) 3,024.00 Tropical Shipping 1,500.00 Miscellaneous Tools (drill bits, etc) 504.00 Total Cost with three rows of fenders 12,000.00 Please advise on which Option you would like in addition to number of holes per piece (3 or 4) utmsource=google_shopping&utm_medium=cpc&utm campaign=Googlaopping_Feed&g&SjwKEAj wh6SsBRCYrKHF7J3NjicSJACUxAh7poTcc2K3zsySvFqwmG1.2K3TUQ52UwvFjuxcOQ- Lh5hoCFKnw wcB&gclsrc=aw.ds Richard Kahn HBRK Associates Inc. 575 Lexington Avenue 4th Floor New York NY 10022 tel fa cel EFTA00853630