SIEMENS

SIEMENS > 9 East 71' street > New York, New York 10021 > Attn: Rich Barnet Project Design of a custom application for Apple IPAD Industry, Inc. SERVICE PROPOSAL No.: 1101051C Date: January 28, 2011 Limiting Date: 30 Days Proposal Siemens Industry will design and install a custom interface using a Crestron Application on the IPAD and Siemens Modbus drive to push date from the existing Building Automation system to Apple IPAD. Investment: $34,252.00 (Thirty Four Thousand Two Hundred Fifty Two Dollars) Plus tax 7 Wiring by Siemens ri Wiring by others n No wiring required Terms of Payment: n Monthly Progress Payments • No Retainage • % in Advance ri Net 30 From Invoice Terms and Conditions of Sale shown on reverse are a part hereof We do not include Consequential and Indirect Damages Proposal Submitted: is authorized to proceed with Siemens Industry, Inc. The Proposal Accepted: Siemens Industry. Inc. the work as proposed. Purchaser By Title Date Siemens Industry. Inc By Bradley Rickert Title Sr. Service Sales Engineer Date January 28, 2011 19 Chapin Road. Bldg. B-200 Pine Book. NJ 07058 Telephone (973) 3964142 Fax (973) 575.7968 © Siemens Industry. Inc. EFTA01071646 SIEMENS Building Technologies TERMS AND CONDITIONS OF SALE (Service Sales) By accepting this proposal. Purchaser agrees to be bound by the following terms and conditions: I. SCOPE OF WORK This proposal is based upon straight time labor and excludes all plastering. patching and painting. Any request by the Purchaser for overtime work shall be considered an extra. In line devices such as valves. dampers, humidifiers. immersion wells (separable sockets). pressure taps. liquid flow switches. orifice plates. orifice flanges. etc.. Mich may 0e furnished hereunder shall be distributed and installed by others under Landis 8 Steele. Inc. (hereinafter called "Sallee) supervision and al no additional cost to Seller. Purchaser agrees to provide Seller with requied field utilities (electricity. toilets. drinking water. project hoist and elevator service. etc.) Seller agrees at all times to keep the job site clean of debris arising out of its own operations. and Purchaser shall in no event tackcharge Seller for Purchaser's cleanup costs without Seller's written consent. 2. REMITTANCES All invoices shall be due and payable in United States currency. free of exchange. collection, or any other charges. upon receipt or as otherwise agreed upon and set forth in writing by Seller. The Purchaser. it so requested agrees to fumish Seller with all information including financial statements. necessary to make proper credit appraisal. Refusal to supply such information may cause this proposal to 0e withdrawn. Terms of payment originally granted are subject to the approval of continued credit status. Prices are subject to correction for error. 3. PAYMENTS Seller reserves the right to render invoices from time to time as the work progresses. which shall be due and payable as provided in the paragraph entitled 'Remittance'. If the Purchaser becomes overdue in any progress payment. including retention. Seller shal be entitled to suspend work. entitled to interest al the annual rate of 18% or the maximum rate permitted by the laws of the State of Illinois. and/or avail itself of other legal remedies. 4. If the materials or equipment ricluded in this proposal become temporarily or permanently unavailable for reasons beyond the control and without the fault of Seler. then ri the case of such temporary a-availability. the time for performance of the work shall be extended to the extent thereof. and in the case of permanent unavailability. Seller shall (a) be excused from furnishing said materials or equipment. and (0) be reimbursed for the difference between the cost of the materials or equipment permanently unavailable and cost of a reasonably available substitute therfor. 5. MATERIALS Seller will immediately undertake to purchase the materials required by the contract and will suitable inure and store the materials on the job site or al other storage facilities. Purchaser agrees to pay for said materials when delivered to the job site or other storage facilities and to pay for the cost of insurance and the cost of storage for said materials. 6. WARRANTY Seller warrants that the equipment furnished by it shall be free from defects in material and workmanship arising from normal usage for a period of one (1) year from deWery of said equipment. or if installed by Seller for a period of one (1) year from installation. For equipment installed by Seller. if Purchaser provides written notice to Seller of any such defect within thirty (30) days after the appearance or discovery of such defect Seller shall. at its option. promptly repay or replace the defective equipment. For equipment not installed by Seller. if Purchaser returns the defective equipment to Seller within thirty (30) days after appearance or discovery of such defect. Seller shall. at its option. promptly repair or replace the defective equipment and retum said equipment to Purchaser. All transportation charges ricurred in connection with the warranty for equipment not instated by Seller shall 0e bome by Purchaser. THESE WARRANTIES ARE IN LIEU OF ALL OTHER WARRANTIES. EXPRESS OR IMPLIED. INCLUDING. BUT NOT LIMITED TO. THOSE OF MERCHANTABILITY AND FITNESS FOR A SPECIFIC PURPOSE. Seler assumes no responsibility for repairs made on Sellers equipment unless done by Seller's authorized personnel. or by written authority from Seller. Seller makes no guarantee with respect to material not manufactured by it. 7. PURCHASER'S REMEDIES The Purchasers remedies with respect to equipment found to be defective n material or workmanship shall be limited exclusively to the right of repair or replacement of such defective equipment. IN NO EVENT SHALL SELLER BE LIABLE FOR CLAIMS (BASED UPON BREACH OF IMPLIED WARRANTY) FOR ANY OTHER DAMAGES. WHETHER DIRECT. IMMEDIATE. FORESEEABLE. CONSEQUENTIAL. OR SPECIAL OR FOR ANY EXPENSES INCURRED BY REASON OF THE USE OR MISUSE OF EQUIPMENT WHICH DOES OR DOES NOT CONFORM TO THE TERMS AND CONDITIONS OF ANY CONTRACT RESULTING FROM THIS PROPOSAL. 8. TAXES The amount of any future sales. use. occupancy. excise, or other tax. federal. state. or local which Seller hereafter shad 0e obligated legally to pay. either on its own behalf or on behalf of the Purchaser or otherwise, with respect to the material covered by this proposal, shall be added to such prices and paid by the Purchaser. 9. LOSS. DAMAGE OR DELAYS Seller shall not be liable for any loss, delay. injury or damage that may be caused by circumstances beyond its control including. but not restricted to acts of God. war. civil commotion. acts of government, fire. theft, corrosion. floods. freeze-ws. strikes. lockouts. differences with workmen. riots. explosions, quarantine restrictions. delays in transportation. shortage of vehicles. fuel. labor or materials. or malicious mischief. IN NO EVENT SHALL SELLER BE LIABLE FOR BUSINESS INTERRUPTION LOSSES OR CONSEQUENTIAL OR SPECULATIVE DAMAGES. Out this sentence shall not relieve Seller of lability for damage to property or injury to persons resulting from accidents caused directly by the negligence of Seller in performance or failure of performance of its obligations under this agreement. 10. GOVERNING LAW Any contract resulting from this proposal shall 0e governed by. construed, and enforced in accordance with the laws of the State of Illinois. 11. PATENT INFRINGEMENT Seller will hold its Purchaser and the Owner harmless from infringement of any United States patent covering equipment of its manufacture. This, of necessity. is limited to the equipment per se and cannot be extended to applications of such equipment in a system, except ri writing by an officer of Seller. The Purchaser and Owner shall advise Seller immediately in the event any claims of infringement are brought to their attention. 12. ACCEPTANCE OF TERMS This proposal shall become a bindng contract between the Purchaser and Seller when accepted in writing by the Purchaser. Such acceptance shal be with the mutual understanding that the terms and conditions of this proposal are a part thereof with the same effect as though signed by both parties named here., and shall prevail over any inconsistent provision of said order. No waiver, alteration or modification of the terms and conditions on this and the lace side hereof shall be birling unless witting and signed by an authorized representative of Seller. t3. ATTORNEYS' FEES Purchaser agrees that he will pay and reimburse Seler for any and all reasonable attorneys fees which are incurred by Seller in the collection of amounts dueand payable hereunder. 14. CANCELLATION AND SUSPENSION Any contract resulting from this proposal is subject to cancellation or instructions to suspend work only upon agreement to pay Selers adjustment charge. EFTA01071647 SIEMENS Systems Integration Technical Specification Sheet Document No. 127-1649 May 13, 2010 Modbus Driver on the PXC Modular Platform Management Level Network Automation Level Network Insight Workstation (BACnet IP) PXC Modular with Furnware Revision 3.1 and Later (BACnet MS,TP) Driver Installed in PXC Modular T • AND OR RS-485 PXC Modular Equipment below this line typically supplied and installed by others. (Modbus RTU) OR (P1 Network) RS.485 bunk TninkfRS-422 Interlace II • Interlace I RS-232 RS-485 MUL11DROP Modbus Slave Device Modbus Slave Device RS-485 RS-422 RS-422 MULTIDROP Modbus Slave Device (0 th r Modbus Slave Devices (h r Modbus Slave Dev ces) System Arch Lecture-Modbus Pilaster on the PXC Modular Platform (Firmware 3.4 Digital Room Sensor Lab Room Controller VFD Siemens Industry. Inc. Page I of 5 EFTA01071648 Insight' Workstation Management Level Network Automation Level Network Equipment below this tine typically supplied and installed by others. (Modbus RTU) I OR RS-485 I 7 TrunfoRS-422 -485 RS-485 Trunk Interlace • • Interface I - 4 RS-485 MULTIDROP Modbus Slave Device RS-232 Modbu Slave Device RS-422 RS-922 MULTIDROP Modbus Slave Device (Other Modbus Slave Devices (Oth r Modbus Slave Devices) System Architecture—Modbus Master on the PXC Modular Platform (Firmware 2.4 Digital Room Senior Lab Room Controller Page 2 at 5 Siemens Industry. Inc. EFTA01071649 Management Level Network Automation Level Network (TCPAP or BACnet/IP) (RS-485) Insights Workstation HDriver Installed PXC Modular OR Driver Installed In PXC Modular R8-485 Equipment below this line typically supplied and installed by others. RS-485 Interlace * • Trunk RS-232 Third-party Workstation (Modbus Master) System Architecture—Modbus RTU Slave (RS-485 or Ethernet TCP/1P ALN). Siemens Industry. Inc. Page 3 of 5 EFTA01071650 (TCP/IP or BACnet/IP) Management Level Network Automation Level Network ■ Insight - Workstation (Modbus TCP or Modbus RTU Over Ethernet) --I Driver I stalled In I-- PXC Modular dr Equipment below this line typically T supplied and Installed by others. RS-485 FLN 1,2, and/or 3 (Modbus RTU) OR Modb s TCP Server (P1 Network) RS-485 Interface Trunk I R1S-485 Trunk/RS-422 RS-485 -422 II r Interface FT RS RS-232 RS.485 MULTICROP R5-422 MULTIDROP Modbus Slave odbus Slave Modbus Slave Device De lee Device (0 th r Modbus Slave Dev ces) (Oth r Modbus Slave Dev ces) Modb s RTU Over Ethernet Device TEC rrni System Archite ture—Modbus TCP Client and Modbus RTU over Ethernet (Ethernet TCP/IP ALN). Notes on System Architecture The Modbus Driver provides communication between the APOGEES Automation System and Modbus devices. In addition, when configured in the Modbus RTU Master mode, the driver can support APOGEE P1 devices. The Modbus Driver supports the following: • 3 physical FLNs (1 through 3) can be used for connecting and addressing either Modbus RTU or P1 devices on RS-485 FLNs. • 95 virtual FLNs (6 through 100) for mapping devices through an Ethernet TCP/IP ALN. • Up to 247 device addresses per FLN. • Maximum of 8000 points per driver. Functionality Digital --4;t: Room Sensor Lab Room Controller VFD The Modbus Driver can be loaded into PXC Modular hardware. The driver is a microprocessor-based, multitasking platform designed for multi-system communication and control. The Modbus Driver communicates with Insight® software, other APOGEE field panels and controllers, and Modbus devices. Through the Insight® workstation, the Modbus points can be monitored and commanded. The Modbus points integrated into the APOGEE Automation System can be accessed by system applications such as Powers Process Control Language (PPCL), scheduling, trending, and alarming. The Modbus Driver will not affect, in any way, the operating sequence or safeties as factory programmed into Modbus devices. Page 4 o15 Siemens Industry. Inc. EFTA01071651 Keys to Success Ensure that all Modbus equipment to be integrated is supported by the Modbus Driver. Benefits Systems integration brings the powerful facility control capabilities of the APOGEE Automation System together with Modbus devices. Integrating the Modbus points allows both systems to operate as a single system providing marked advantages in the following: • Reduced operating and training costs. • Increased employee productivity. • Increased diagnostic capabilities to extend equipment life. • Improved systems information and control. • Maximized energy savings. Products Supported Since Modbus is an extremely popular and well- supported protocol, many devices and control systems have Modbus available. The Modbus Driver in Modbus RTU Master mode also supports APOGEE P1 Field Level Networks. Ordering Information Hardware Description Product Number PXC Modular. Ethernet/IP or RS- 485 ALN, P1 FLN. PXX-485.3 is also required as the connection to the FLN devices. PXC Modular. BACnet/IP or MS/TP ALN, P1 or MS/TP FLN. PXX-485.3 is also required as the connection to the FLN devices. PXC Modular. Ethernet/IP or RS- 485 ALN, P1 FLN, self-forming TX-I/O Island Bus. PXX-485.3 is also required as the connection to the FLN devices. PXC Modular. BACnet/IP or MS/TP ALN, P1 or MS/TP FLN. self-forming TX-I/O Island Bus. PXX-485.3 is also required as the connection to the FLN devices. Provides FLN support for the PXC PXX-485.3 Modular. Includes three RS-485 P1 FLN connections or one MS/TP FLN connection: maximum of 96 devices supported. License Description License to enable the Modbus Driver For more information, visit www.buildingtechnologies.usa.siemens.com. PXC00-PE96.A PXC00-L96.A PXC100-PE96.A PXC100-E96.A Product Number LSM-INT-MDBS Information in this document is based on specifications believed correct at the time of publication. The right is reserved to make changes as design improvements are introduced. APOGEE and Insight® are registered trademarks of Siemens Industry, Inc. Other product or company names mentioned herein may be the trademarks of their respective owners. 2010 Siemens Industry. Inc. Siemens Industry, Inc. Your feedback is important to us. If you have Document No. Building Technologies Division comments about this document lease send them Printed in the USA 1000 Deerfield Parkway to Page 5 of 5 Buffalo Grove, IL 60089-4513 U.S.A EFTA01071652