Skip to main content
Skip to content
Case File
efta-efta01117786DOJ Data Set 9Other

DS9 Document EFTA01117786

Date
Unknown
Source
DOJ Data Set 9
Reference
efta-efta01117786
Pages
3
Persons
0
Integrity
No Hash Available

Summary

Ask AI About This Document

0Share
PostReddit

Extracted Text (OCR)

EFTA Disclosure
Text extracted via OCR from the original document. May contain errors from the scanning process.
QUOTE Page 1 November 15, 2013 SeeSawUSA.com P.O. Box 440366 Houston, TX 77244-0366 Phone: To: MARK TOLLISON 9 E 71ST ST New York, NY 10021-4102 Re: Zip Track Exterior Solar Shade Fabric: Textilene 95% SE Series 4 Zip Track: Radio Motor Qty Width Height Price Each Total 8 120" 120" $ 2680 $ 21,440 1 4 Channel Remote $ 138 $ 138 Subtotal $ 21,578 Shipping via motor freight (oversize) $ 600 Total $ 22,178 Wind Load: moderate Shipping is $75 per shade if five or more are purchased. Please include the headbox when measuring the height and the side tracks when measuring the width. More information on the Zip Track: http://www.seesawusa.com/products/115 Shipping prices are for contiguous United States. Shades over 94 inches wide must be shipped via motor freight. EFTA01117786 SE Series 4 Exterior Solar Shade SPECIAL NOTES: When measuring the screen for an outside flush/surface mount, remember to allow for side tracks (each side is 2 1/ 4") and remember to allow for the height of your housing plus the height of the hem bar (1 7/8" plus brush size) so that nothing is in the opening. For inside mounting, always take the narrowest measurement and deduct 1/4" to 1/2 " to allow for fastening heads and "L" mounting channel thickness (this would be total for both sides). Always use longest measurement for calculating your drop. Fabric seams will always run horizontally. They are placed as high as possible unless otherwise stated. Seam placement is from the bottom of the hem bar up to the seam APPLICATION DATA • Interior/Exterior Use • Maximum: 18 (w) x 10' (h) • Low to High Wind Application • Window, Patio & Garage • Advertising Display FABRICATION DATA • Registered ISO 9000/9001 • Extruded Aluminum • Nylon Components • Powder Coat Finish • 3 Inch Roller Tube • Stainless Steel Fasteners STANDARD FEATURES • Extruded Aluminum Components • Side Track Retention System • Built-in Dual Screen Cleaning System ELECTRICAL DATA • AC Motor Specifications: 120 VAC/60Hz • 2 to 3 Amps • FCC Approved and UL Listed • Somfy/RTS Motor Drive System • Home Automation Interface Available STANDARD HARDWARE COLORS • Black • Green • Bronze • Navajo • Brown • Tan • Desert Sand • White • Gray • Bright White SeeSawUSA.com EFTA01117787 SE Series 4 Exterior Zip Track Shade Outer 'Roller Tube 03" 02" 41. Housing ti Inner Roller Tube Housing Cover Surface or Inset Mount Side Track 5 3„ 2 16 " 7 , 8 Recessed Side Track (Preconstruction) 1" X 2 1/2" "L" Mounting Bracket (Inset Option) Hem Bar EFTA01117788

Technical Artifacts (2)

View in Artifacts Browser

Email addresses, URLs, phone numbers, and other technical indicators extracted from this document.

Phone244-0366
URLhttp://www.seesawusa.com/products/115

Forum Discussions

This document was digitized, indexed, and cross-referenced with 1,400+ persons in the Epstein files. 100% free, ad-free, and independent.

Annotations powered by Hypothesis. Select any text on this page to annotate or highlight it.